Anodizing VS Electroplating: Ịhọrọ ọgwụgwọ dị elu maka ngwaahịa gị!

N'ichepụta, ọgwụgwọ elu na-arụ ọrụ dị oke mkpa, karịsịa mgbe a na-emeso ọla na plastik.Anodizingnaelectroplatingbụ ụzọ abụọ a na-ejikarị eme ihe iji kwalite ọdịdị, ịdịte aka, na ịrụ ọrụ nke ngwaahịa. Taa, anyị na-aga imebi ọdịiche dị n'etiti usoro abụọ a, ka ị nwee ike ịme mkpebi nke ọma maka ọrụ gị ọzọ.

1. Anodizing: Ịmepụta oyi akwa siri ike, nchekwa

Anodizingbụ usoro electrochemical nke a na-ejikarị eme ihe maka aluminum na alloys ya. Usoro a na-etolite okeoxide oyi akwan'elu metal, nke budata mmaiguzogide corrosion,mgbochi abrasion, naoxidation iguzogide. Tụkwasị na nke ahụ, enwere ike ịcha ihe ndị anodized na agba dị iche iche, sitere nanwakaọla edo, na ọbụnaagba egwurugwu, na-enye ma mma mma na uru ọrụ.

Uru:

• Nguzogide corrosion kacha elu: Ọ dị mma maka akụkụ aluminom nke ekpughere na gburugburu ebe siri ike, na-eguzogide nnu, mmiri mmiri na ihe ndị ọzọ na-emebi emebi nke ọma.

• Isi ike elu elu: Okpokoro oxide nwere ike iru ọkwa siri ike ruoIke 9H, na-enye nguzogide abrasion pụrụ iche.

• Enyi na gburugburu ebe obibi: Enweghị mmetọ ma na-ezute ụkpụrụ omume enyi.

• Ịgbanwe agba: Enwere ike iji anodizing mepụta ụdị agba dị iche iche, na-enye ohere maka nhọrọ nhazi dị iche iche.

Ngwa:

• Igwe ọkụ eletrik

• Akụkụ ụgbọ ala

• Akụrụngwa dị n'èzí (dịka ọmụmaatụ, okpokolo agba aluminom)

• Ngwa ndị dị elu

2. Electroplating: Ịgbakwunye mkpuchi ọla maka ịrụ ọrụ dị mma

Electroratinggụnyere iji ọkụ eletrik na-etinye oyi akwa igwe n'ime mkpụrụ. The metal ion, dị kanickel,chrome,ọla edo, ma ọ bụọlaọcha, na-ebufe n'elu ihe isi ala. Electroplating na-ọtụtụ ebe na-eji ma metal na plastic na-ebupụta ka welieiguzogide corrosion, meliteaesthetics, ma nyekwa ọrụ ọzọ.

Uru:

• Mmasị mma emelitere: Elu eletrọnịkị nwere ike nweta ihe dị elu na-egbuke egbuke na enyo dị ka enyo, na-eme ka ihe ngosi nke ngwaahịa ahụ dịkwuo elu.

• Ntugharị ihe onwunwe: Enwere ike itinye ya na ma metal na plastic substrates, na-enye mgbanwe dị ukwuu na mmepụta.

• conductivity emelitere: Electroplating na ọla dị ka nickel ma ọ bụ ọla kọpa enhances eletriki conductivity nke components, na-eme ka ọ dị mma maka electronic akụkụ.

• Yiri nguzogide: Ihe mkpuchi electroplated nwere ike inye ụfọdụ nchebe iyi, karịsịa maka akụkụ ndị na-akpụ akpụ.

Ngwa:

• Akụkụ akpaaka (dịka ọmụmaatụ, baajị ụgbọ ala nwere chrome)

• Ngwa ụlọ (dịka ọmụmaatụ, akụkụ igwe nke igwe ịsa ahụ, friji)

• Ngwaahịa eletrọnịkị (dịka ọmụmaatụ, igwe igwe na kọmpụta)

• Ihe ịchọ mma na ngwa ahịa dị elu

• 3. Isi Esemokwu: Olee nke Ị Kwesịrị Ịhọrọ?

  Njirimara	Anodizing	Electrorating
  Usoro	Mmeghachi omume electrochemical nke na-etolite oyi akwa oxide	Ndokwa igwe eletrọnịkị n'elu
  Ngwa ndị ọdabara	N'ụzọ bụ isi aluminom na alloys ya, mgbe ụfọdụ titanium na magnesium	Ọla na plastik (nke nwere mkpuchi ọla dị ka nickel, chrome, gold, wdg.)
  Ọdịdị	Matte, satin, ma ọ bụ agba ọla, nwere elu ederede	Glossy, enyo dị ka emechara, dị mma maka mmetụta ọla
  Ịdị ogologo	Isi ike dị elu, ezigbo nguzogide corrosion, na-adịte aka	Dabere na oyi akwa igwe, nguzogide abrasion na-agafeghị oke
  Mmetụta gburugburu ebe obibi	Eco-enyi na enyi, enweghị mmetọ	Nwere ike itinye kemịkalụ dị ize ndụ, mkpa ijikwa ihe mkpofu
  Ọnụ	N'ozuzu elu n'ihi usoro mgbagwoju anya	Ọnụ ego dị ala, usoro dị mfe

   

  Nkwanye:

  • Ọ bụrụ na ị chọrọelu isi ike, corrosion iguzogide, na anwụ ngwa ngwa, karịsịa makaaluminomakụkụ,anodizingbụ nhọrọ kacha mma.

  • Ọ bụrụ na ebumnuche gị bụ ịkwaliteọdịdị, karịsịa makaọla emecha, ma ọ bụ ọ bụrụ na ị na-arụ ọrụplastik,electroplatingbụ ihe ngwọta dị ọnụ ahịa karịa.